3C-REN

Installing Heat Pump HVAC Systems in Manufactured Homes
2024-11-19 13:00 - 15:30 UTC | Chumash Village, 3057 S Higuera St, San Luis Obispo, CA, 93401, United States
Register
Event Description
Manufactured homes are an underserved market for home energy upgrades that come with unique opportunities and challenges. Attend this in-person training to learn best practices for installing heat pump water heaters in a double wide manufactured home. Complementary lunch will be provided from Lincoln Deli.
Attendees can meet at Chumash Village Community Room for lunch and can park outside the main building. After lunch they will move to a double wide unit located on site for the training.
Event Learning Objectives

The hurdles of doing ductwork in manufactured homes
How to size HVAC systems correctly
The refrigerant cycle: dos and don’ts
Proper installation techniques for energy efficiency
The importance of variable speed blowers
Proper wiring: why it is needed and what each wire does
Risks caused by bad airflow
Proper maintenance

Instructor
Jim McNamara, CAPSLO

HRV and ERV Basics
2024-11-21 09:00 - 10:30 (America/Los_Angeles)
Register
Event Description
HRV and ERV Basics will provide introductory level information about HRVs and ERVs and how they are installed in today’s homes. Information will be provided to enable learners to achieve the following learning objectives:

Describe how HRVs and ERVs provide fresh air into a home.
Identify the components of HRV and ERV systems.
Recognize and plan for climate and occupancy in system design.
Explain the difference between HRVs and ERVs and accurately select the appropriate system.
Understand energy savings that can be achieved through correct installation of an HRV.
Develop basic system design: understanding specifications, system types and sizing, placement, airflows, system types and configurations.

Learning Units
1 AIA LU Pending for this course
Instructor
Eric Fenno, Small Planet Supply

3C-REN Contractor Connection Hub at Standard Plumbing Supply
2024-11-27 07:00 - 12:00 UTC | Standard Plumbing Supply & Hardware, 3330 Saviers Rd, Oxnard, CA, 93033, United States
Register

Event Flyer

Installing Heat Pump Water Heaters (HPWH) – In Partnership with Ventura County Contractors Association
2024-12-03 07:30 - 09:00 UTC | Hansen’s Plumbing, 2686 Johnson Dr Ste 203, Ventura, 93003, United States
Register
Heat pump water heaters are where California is headed, and this workforce education aims to smooth that transition. Learn from experts how to install heat pump water heaters so they provide reliable and efficient hot water on your projects. Designed for plumbers and HVAC technicians with hands-on material, this training will be useful to all audiences.
Light refreshments will be served.
This event is part of a series in partnership with local contractor associations. Check out the event flyer to learn more!
Learning Objectives

Understand why we need HPWHs
Distinguish how HPWHs are different from typical water heaters
Acquire practical skills through a hands-on demonstration on installing a HPWH in a closet
Understand the importance of Air Flow
Explore the do’s and don’ts of installation based on real-life examples

Instructors
Nick Brown, Build Smart Group
Gary Klein, Gary Klein & Associates

Installing Heat Pump Water Heaters (HPWH) – In Partnership with Santa Barbara Contractors Association
2024-12-04 07:30 - 09:00 UTC | Santa Barbara Veterans Memorial Building, 112 W Cabrillo Blvd, Santa Barbara, 93101, United States
Register
Heat pump water heaters are where California is headed, and this workforce education aims to smooth that transition. Learn from experts how to install heat pump water heaters so they provide reliable and efficient hot water on your projects. Designed for plumbers with hands-on material, this training will be useful to all audiences.
Light refreshments will be served.
This event is part of a series in partnership with local contractor associations. Check out the event flyer to learn more!
Learning Objectives

Understand why we need HPWHs
Distinguish how HPWHs are different from typical water heaters
Acquire practical skills through a hands-on demonstration on installing a HPWH in a closet
Understand the importance of Air Flow
Explore the do’s and don’ts of installation based on real-life examples

Instructors
Nick Brown, Build Smart Group
Gary Klein, Gary Klein & Associates

Installing Heat Pump Water Heaters (HPWH) – In Partnership with Santa Maria Valley Contractors Association
2024-12-04 12:00 - 13:30 UTC | Santa Maria Veteran’s Memorial Building, 313 W Tunnell St., Santa Maria, CA, 93458, United States

Installing Heat Pump Water Heaters (HPWH) – In Partnership with SLO County Builders Exchange
2024-12-05 08:00 - 09:30 UTC | SLO County Builders Exchange, 153 Cross St Ste 130, San Luis Obsipo, CA, 93401, United States

3C-REN Single Family Home Energy Savings Program: 2025 Market Overview Webinar
2024-12-06 09:00 - 09:45 UTC
Register
Event Description
Join us for the 3C-REN Single Family Home Energy Savings Program: 2025 Market Overview Webinar, where we’ll share key program updates, including details on the incentive budget and important changes to the project submission process through the new Project Hub. This webinar is your opportunity to get ahead of the market reopening on December 11th, 2024, and ensure a smooth start to the 2025 program year.
Speaker
Reid Leiter, Recurve

Ventura County Electrification Incentive Breakfast for Contractors
2024-12-10 07:30 - 09:00 UTC | Ventura County Government Center, 800 S Victoria Ave, Ventura, CA, 93009, United States
Register
Event Description
Join 3C-REN, TECH Clean California, Santa Barbara Clean Energy, and Central Coast Community Energy for an in-person workshop to learn more about federal, state, and local incentives and rebates available across the Central Coast to support home electrification projects as well as upcoming training opportunities for your business. Breakfast will be provided for attendees.

Santa Barbara County Electrification Incentive Lunch for Contractors
2024-12-10 12:15 - 13:30 (America/Los_Angeles) | Santa Barbara Golf Club (Mulligan’s Cafe), 3500 McCaw Ave, Santa Barbara, CA, 93105, United States
Register
Event Description
Join 3C-REN, TECH Clean California, Santa Barbara Clean Energy, and Central Coast Community Energy for an in-person workshop to learn more about federal, state, and local incentives and rebates available across the Central Coast to support home electrification projects as well as upcoming training opportunities for your business.
Lunch will be provided for attendees.

Santa Maria Electrification Incentive Breakfast for Contractors
2024-12-11 07:30 - 09:00 UTC | Minami Community Center, 600 W Enos Drive, Santa Maria, CA, 93458, United States

Real Estate Professionals Community Mentoring Session
2024-12-11 09:00 - 10:30 (America/Los_Angeles)
Register
Sessions will provide ongoing support for real estate agents and appraisers on the topics of Efficient, Healthy, Clean-energy Homes.
Participants are invited to bring questions, share experiences, and continue to build their expertise.
Instructor: Debra Little, Home Performance and Valuation Specialist, AjO

For Residents: Finding Heat Pump HVAC Experts and Unlocking Rebates
2024-12-11 18:30 - 19:30 UTC
Register
Event Description
Join 3C-REN and Resilient Central Coast for an informative webinar on heat pump technology for home heating and cooling. Finding a knowledgeable contractor is key to ensuring you choose the right system for your home electrification needs. Since heat pump technology is relatively new, working with an experienced contractor will help you identify the best solution for your home, navigate available incentives, and explore other electrification options.
In this 1-hour session, we’ll cover:

The nuances of HVAC heat pump technology
How to find qualified contractors and ask the right questions to verify their expertise
Tips for comparing quotes, including efficiency ratings and available incentives
Information on rebates for Central Coast residents from programs like TECH Clean CA, the Inflation Reduction Act (HEEHRA), 3CE and 3C-REN

We look forward to equipping you with the knowledge and resources to upgrade your HVAC system!
Speakers
Representatives from Ecology Action, 3C-REN, Electrify Now and Electrify My Home

Installing Heat Pump Water Heaters in Manufactured Homes
2024-12-12 13:00 - 15:30 UTC | Chumash Village, 3057 S Higuera St, San Luis Obispo, CA, 93401, United States
Register
Event Description
Manufactured homes are an underserved market for home energy upgrades that come with unique opportunities and challenges. Attend this in-person training to learn best practices for installing ducted heat pump HVAC systems in a double wide manufactured home. Complementary lunch will be provided from Lincoln Deli.
Attendees can meet at Chumash Village Community Room for lunch and can park outside the main building. After lunch they will move to a double wide unit located on site for the training.
Learning Objectives

How to size heat pump water heaters for manufactured homes
The importance of thermostatic mixing valves and expansion tanks
Ventilation best practices
Installation techniques for plug-in water heaters.
When and how to re-pipe to accommodate a new water heater

Instructor
Rich Souther, Pacific Heating & Sheet Metal

Centralized versus Decentralized Ventilation Systems
2024-12-18 09:00 - 10:30 (America/Los_Angeles)
Register
Event Description
There are a number of new decentralized ventilation products and certainly more centralized HRV systems. What do customers need to consider when choosing between these systems for their new or retrofit projects.
Learning Objectives

Communicate why ventilation is necessary as homes and buildings become more airtight.
Summarize the differences between a centralized and decentralized balanced ventilation system.
Identify the pros and cons of centralized and decentralized ventilation systems.
Explain ventilation system choices to customers (for builders).

Learning Units
1 AIA LU Pending for this course
Instructor
Eric Fenno, Small Planet Supply

Carbon Reduction through Building Electrification – Part 1: All-Electric Design and Construction Series
2024-12-19 12:00 - 13:00 UTC
Register
Event Description
All-Electric Design & Construction Series
On the path to Zero Net Carbon Design, building electrification is the key to reducing operational carbon. In this course, we’ll share the nuts and bolts of incorporating all-electric systems into residential and small commercial projects, including tips for implementation as well as client communication. We’ll provide straight-forward information on current systems and technologies plus a look ahead at what’s emerging in the market.

Part 1: Carbon Reduction through Building Electrification will address California’s targets for carbon reduction, status of the clean power grid, the role of energy storage and emerging options for refrigerants.
Part 2: Heat Pumps for Heating and Cooling will address ducted and ductless heat pumps for thermal comfort.
Part 3: Domestic Hot Water, will focus on integrated and split-system Heat Pump Water Heaters, as well as combination systems and point-of-use electric resistance water heaters
Part 4: Ventilation and HRV, will look at exhaust fans, ducted ventilation and heat recovery ventilators that support energy efficiency and healthy interiors
Part 5: Appliances & Energy Storage, looks at electric options for cooktops, dryers and other appliances as well as current and emerging battery technologies for energy storage.

This series has been developed to fulfill the California requirement for five hours of ZNCD education as part of architecture license renewal. Although created with architects in mind, the content is broadly applicable across the building industry.

Learning Objectives

Learn the ‘why’ behind California’s shift to building electrification and the link to Zero Net Carbon Design
Learn the pros and cons of various products to help in selecting appropriate systems that meet electrification and carbon-reduction goals
Learn critical installation details such as dimensions and venting to call out in plans and/or identify early in construction
Understand the local market for specific all-electric/ZNCD equipment, including cost, availability and lead times

Learning Units
1.0 AIA HSW LUs approved for this course

Instructor
Jennifer Rennick, In Balance Green Consulting

Heat Pumps for Heating and Cooling – Part 2: All-Electric Design and Construction Series
2025-01-09 12:00 - 13:00 UTC
Register
Event Description
All-Electric Design & Construction Series
On the path to Zero Net Carbon Design, building electrification is the key to reducing operational carbon. In this course, we’ll share the nuts and bolts of incorporating all-electric systems into residential and small commercial projects, including tips for implementation as well as client communication. We’ll provide straight-forward information on current systems and technologies plus a look ahead at what’s emerging in the market.

Part 1: Carbon Reduction through Building Electrification will address California’s targets for carbon reduction, status of the clean power grid, the role of energy storage and emerging options for refrigerants.
Part 2: Heat Pumps for Heating and Cooling will address ducted and ductless heat pumps for thermal comfort.
Part 3: Domestic Hot Water, will focus on integrated and split-system Heat Pump Water Heaters, as well as combination systems and point-of-use electric resistance water heaters
Part 4: Ventilation and HRV, will look at exhaust fans, ducted ventilation and heat recovery ventilators that support energy efficiency and healthy interiors
Part 5: Appliances & Energy Storage, looks at electric options for cooktops, dryers and other appliances as well as current and emerging battery technologies for energy storage.

This series has been developed to fulfill the California requirement for five hours of ZNCD education as part of architecture license renewal. Although created with architects in mind, the content is broadly applicable across the building industry.

Learning Objectives

Learn the ‘why’ behind California’s shift to building electrification and the link to Zero Net Carbon Design
Learn the pros and cons of various products to help in selecting appropriate systems that meet electrification and carbon-reduction goals
Learn critical installation details such as dimensions and venting to call out in plans and/or identify early in construction
Understand the local market for specific all-electric/ZNCD equipment, including cost, availability and lead times

Learning Units
1.0 AIA LU approved for this course

Instructor
Jennifer Rennick, In Balance Green Consulting

Certified Passive House Designer/Consultant (CPHD) Pacific Winter Hybrid Cohort
2025-01-16
Apply Here
3C-REN is pleased to offer The Passive House Network’s (PHN’s) Certified Passive House Designer/ Consultant hybrid cohort. This training is available at no cost to residents and those who work in the counties of Ventura, Santa Barbara, and San Luis Obispo. The CPHD course is the premier Passive House professional training for architects, engineers, and building professionals and is supported by the 31-year history of global technical leadership of the Passive House Institute.
The upcoming online Winter Cohort starts on January 16th with an exam scheduled on April 3rd. For more information on the training, check out the training brochure and schedule or visit Pacific Winter 2025 Cohort – The Passive House Network. The hybrid cohort schedule is approximately 8 weeks from kick-off to completion, followed by 4 to 5 weeks of exam prep.
Complete the interest form ASAP to confirm your eligibility for the cohort. Space is limited. Registration is first come, first serve with limited equal spaces per Ventura, Santa Barbara, and San Luis Obispo Counties. Confirmed registrants will be sent a link and an enrollment code to register with PHN’s training portal.
By registering for the Pacific Cohort, you commit 3C-REN to pay the training and exam fee on your behalf, valued at $2,295.
Course Overview
The course is structured to be flexible in timing yet get you to the exam date prepared for the test and ready for designing and building.
The CPHD/C training is a specially designed for professionals in the U.S. construction industry. It features Passive House calculations in Imperial units, and has a variety of case studies, with both U.S. and international examples. Regardless, of what type of projects you design – residential, commercial, institutional projects, or with new and retrofit construction – the Passive House standard can be applied.
Who Should Attend
The Certified Passive House Designer / Consultant course was developed for a wide range of student profiles include architects, MEP and structural engineers, façade, energy and sustainability consultants, contractors, developers, policymakers, regulators, and more.

Why Attend this Course

Gain a strong foundation in Passive House principles, and their application, that can influence all your building projects, including single-family, multi-family, mixed-use, commercial, and industrial.
Learn Passive House standards and calculations using Imperial units rather than metric.
Develop the skills needed to calculate for high-performance buildings.
Explore case studies of passive house buildings from a variety of projects and learn best practices and design tips for different conditions.
Learn the core requirements for all certified Passive House designers and consultants so that you can take the certification exam.
Once you pass the certification exam, you’ll possess an internationally regarded professional credential demonstrating leadership in high-performance, low-energy building design.

This training is accredited by the AIA for up to 59 LU/HSWs (CPHD + PHPP).

Domestic Hot Water – Part 3: All-Electric Design and Construction Series
2025-01-16 12:00 - 13:00 UTC

Introduction to the Energy Code
2025-01-22 09:30 - 11:00 UTC
Register
Event Description
This course provides an overview of the California Energy Code, Title 24 Part 6, including the historic context, organization, resources and overall goals for this current code cycle. Serving as an optional refresher for code officials, architects and builders who will be participating in 2025 energy code classes, or as an introduction for those entering the building industry, this course will provide a strong foundation for design, permitting and compliance.
Learning Objectives

Understand what the Building Energy Efficiency Standards code is and why we have one in California
Learn how the energy code is organized and where to find the information you need
Recognize key energy requirements that can inform building design, plan review and construction decisions
Know where to get help quickly for your energy code questions

Learning Units

1.5 AIA HSW LUs approved for this course
0.15 ICC CEUs approved for this course

Instructors
Jennifer Rennick, In Balance Green Consulting
Grant Murphy, In Balance Green Consulting

Ventilation and HRV – Part 4: All-Electric Design and Construction Series
2025-01-23 12:00 - 13:00 UTC
Register
Event Description
All-Electric Design & Construction Series
On the path to Zero Net Carbon Design, building electrification is the key to reducing operational carbon. In this course, we’ll share the nuts and bolts of incorporating all-electric systems into residential and small commercial projects, including tips for implementation as well as client communication. We’ll provide straight-forward information on current systems and technologies plus a look ahead at what’s emerging in the market.

Part 1: Carbon Reduction through Building Electrification will address California’s targets for carbon reduction, status of the clean power grid, the role of energy storage and emerging options for refrigerants.
Part 2: Heat Pumps for Heating and Cooling will address ducted and ductless heat pumps for thermal comfort.
Part 3: Domestic Hot Water, will focus on integrated and split-system Heat Pump Water Heaters, as well as combination systems and point-of-use electric resistance water heaters
Part 4: Ventilation and HRV, will look at exhaust fans, ducted ventilation and heat recovery ventilators that support energy efficiency and healthy interiors
Part 5: Appliances & Energy Storage, looks at electric options for cooktops, dryers and other appliances as well as current and emerging battery technologies for energy storage.

This series has been developed to fulfill the California requirement for five hours of ZNCD education as part of architecture license renewal. Although created with architects in mind, the content is broadly applicable across the building industry.

Learning Objectives

Learn the ‘why’ behind California’s shift to building electrification and the link to Zero Net Carbon Design
Learn the pros and cons of various products to help in selecting appropriate systems that meet electrification and carbon-reduction goals
Learn critical installation details such as dimensions and venting to call out in plans and/or identify early in construction
Understand the local market for specific all-electric/ZNCD equipment, including cost, availability and lead times

Learning Units
1.0 AIA HSW LU approved for this course

Instructor
Jennifer Rennick, In Balance Green Consulting

Appliances and Energy Storage – Part 5: All-Electric Design and Construction Series
2025-01-30 12:00 - 13:00 UTC

Home Electrification Contractor Boot Camp
2025-02-06 08:00 - 2025-02-07 16:30 UTC | America’s Job Center Oxnard, 2901 N. Ventura Road, 3rd Floor, Oxnard, CA, 93036, United States
Register
Course Description
This two-day course provides a robust introduction into residential building electrification. It is designed for construction trade personnel of all levels; including owners, sales managers, salespeople, installers, service technicians, and office support staff (primarily Day 1 for support staff). A key distinction of this training is its design and delivery by Electrify My Home, a pioneering HVAC electrification company with real field experience navigating the ins and outs of this exciting new pathway.
This training is intended for those that live or work in the Tri-Counties. Out of territory registrants will be waitlisted.
Learning Objectives

Understand driving forces, changing technologies, and shifting consumer preferences in the home electrification movement
Explore “Install Small” and “Good Electrification” concepts
Acquire soft skills in electrification sales to pivot from traditional gas heating to modern electric heat pumps without negatively affecting a company’s bottom line
Understand heat transfer mechanisms, functionality, and benefits of heat pumps for residential electrification

Course Content
Day 1—Electrification Basics
1a) Environment, Policy, and Culture
1b) The Clean Electric Home Solution
1c) “Install Small”
1d) Envelope 101
Day 2—Soft Skills in Electrification Sales
2a) Timing & Opportunity
2b) Converting Your Customer
2c) Electrification Products and Panels
2d) Project Planning
Event Dates
This is a two-day course:

Feb 6, 2025: 8:00am to 4:30pm
Feb 7, 2025: 8:00am to 4:30pm

Lodging
Discounted lodging is available at the Staybridge Suites in Oxnard, conveniently located 1.8 miles from the boot camp location.
Lodging is FREE for contractors in the tri-county region, located 65+ miles from course location, who will attend both days. Available upon registration on a first-come basis. Please register for eligibility
Credits
NATE (16 CEHs)
Instructors
Larry Waters, Electrify My Home

Green Building Construction Tour: San Luis Obispo
2025-02-11 15:30 - 17:00 UTC | San Luis Obispo: Location provided upon registration, San Luis Obsipo, California, United States
Register
Event Description
Here’s an opportunity to visit a green building project in person, to learn more about the process and see the implementation of energy efficiency and building electrification in practice. As we tour an active construction site, the builder will provide first-hand information on implementation, lessons learned and best practices. Project location in San Luis Obispo will be provided to registered participants.
Learning Objectives

Learn about installation requirements and options for heat pump mechanical systems
Observe an installed heat pump hot water system and learn the space and location requirements and potential pitfalls to avoid
Discuss ventilation and indoor air quality and different options appropriate for retrofits versus new construction
Review wall, floor and roof assemblies for both insulation and air sealing best practices.

Learning Units
1.5 AIA LUs pending for this course
Instructors
Mike Horgan, Cairn Collaborative
Andy Pease, In Balance Green Consulting

2025 Energy Code Update for the Building Industry
2025-02-12 09:30 - 11:00 UTC
Register
Event Description
The 2025 code cycle takes effect January 1, 2026! This course provides an overview of key changes to Title 24 Part 6 Energy Code, with a focus on architects, builders and others in the construction industry. We’ll provide background on the reasons behind the changes and impacts for projects particularly in the Central Coast region.
Learning Objectives

Understand the organizational changes to the 2025 Energy Code
Identify Big Pictures Goals of the California Energy Commission and how those goals influence changes.
Recognize key updates including building envelope, lighting, mechanical and DHW systems, renewable energy and storage and field verification.
Understand the energy code’s impact for energy performance and indoor air quality.

Learning Units

1.5 AIA HSW LUs approved for this course
0.15 ICC CEUs approved for this course

Instructors
Jennifer Rennick, In Balance Green Consulting
Grant Murphy, In Balance Green Consulting

What Energy Consultants Need to Know About HERS Measures
2025-02-19 10:30 - 12:00 (America/Los_Angeles)
Register
Event Description
This course will cover what Energy Consultants need to know about energy features that require third-party HERS verification. Some HERS measures are required on most projects, but some are optional. Energy consultants might see the energy savings reflected when selecting these optional features but may not be aware of all the work, cost, and coordination required to make them pass in the field.
Learning Objectives

Understand what features require HERS verification.
Understand what HERS measures are fairly simple to pass.
Understand what HERS measures are very difficult to pass.
Learn some best practices for ensuring HERS measures will pass.

Learning Units
1.5 AIA LUs approved for this course
0.15 ICC CEUs approved for this course
Instructor
Russ King, Coded Energy

High Performance Buildings: Designing for Utility Costs & Carbon Emissions
2025-02-20 12:00 - 14:00 (America/Los_Angeles)
Register
Event Description
How can we decide what features to upgrade in our building projects? Most project teams use code minimum, manufacturers’ claims, anecdotes, and gut feelings to decide what insulation, HVAC system, and water heating system to use. This goes especially for solar and battery systems, too. Nick Brown has developed an approach to use hourly energy compliance modeling data to calculate utility costs and carbon emissions, so that these decisions can be made on an informed basis. We will use case studies to understand how to put this approach to work, so that you choose the appropriate envelope, mechanical, and renewable energy systems for your projects.
Learning Objectives

Learn how to use compliance modeling software to make informed design decisions on envelope, mechanical, and renewable systems
Understand how utility costs are calculated with solar systems
Use case studies to show how to calculate return on investment for typical building features
See how Zero Net Carbon design can be achieved

Learning Units

1.5 AIA LUs pending for this course
1.5 ICC CEUs pending for this course

Instructor
Nick Brown, Build Smart Group

Inflation Reduction Act Part 1: Funding Overview of Programs (Real Estate Focus)
2025-02-27 11:00 - 13:00 (America/Los_Angeles)
Register
Event Description
Inflation Reduction Act Part 1: Funding Overview of Programs
IRA funding is coming, bringing huge potential for energy-efficiency upgrades at an affordable cost. By understanding the programs coming, you can help clients maximize their savings – on both their installation costs and utility bills.
Learning Objectives

Current and potential IRA funds and access
Tax credits and incentives
Current rebates from local programs
How Real Estate Professionals can benefit by helping clients access these available funding streams
Strategies for incorporating available IRA-funded programs into your marketing and green real estate practices

Instructor
John Shipman, Franklin Energy

Please note: This training is presented by Franklin Energy and made available through the Tri-County Regional Energy Network (3C-REN), a partnership between the Counties of Ventura, Santa Barbara, and San Luis Obispo to improve energy efficiency. 3C-REN is funded by utility ratepayer funds through the California Public Utilities Commission.
3C-REN’s Building Performance Training program offers training for real estate professionals to communicate the value of high-performance homes during real estate transactions. 3C-REN’s Home Energy Savings program offers free and discounted energy efficiency upgrades to homeowners to increase the performance of their homes. Learn more at 3C-REN.org
Customers who choose to participate in this training are not obligated to purchase any additional services offered by Franklin Energy. Programs may be modified or terminated without prior notice and are provided to qualified customers on a first-come, first-served basis until program funds are no longer available. Eligibility requirements may apply. Participants should live or work in the Tri-County area to attend this training.

Crafting High Performance Enclosures: Roofs, Walls, and Floors
2025-03-04 12:00 - 13:30 (America/Los_Angeles)
Register
Event Description
Building enclosures – the roof, walls, and floor – are the first line of defense between nature and people. Enclosure performance is optimized when air sealing and insulation – two underappreciated and typically underperforming features – are done to high-performance standards rather than the status quo. This class covers installation — the practical application of those principles on the job site – the hands-on activities that differentiate ‘business-as-usual’ from high-performance construction. These include best practices for air sealing, insulation installation, and window installation, along with the tools and methods (e.g., blower door testing) used to measure the quality of work, and the metrics against which the work can be evaluated.
Learning Objectives

Describe preferred methods and materials used for air sealing different types of building openings, and how to test the results;
Explain the difference between conventional insulation practices and “Quality Insulation Installation (QII)” methods, and how QII is verified;
Identify five common building enclosure installation flaws and how to avoid them.
Quantify the magnitude of the gap between minimum energy code compliance and high performance, where all energy features are confirmed with building performance test methods.

Learning Units

1.5 AIA LUs approved for this course
1.5 ICC CEUs approved for this course

Instructor
Judy Rachel, Home Performance Pro

3C-REN Contractor Connection Hub at Beacon Building Products
2025-03-05 08:00 - 13:00 (America/Los_Angeles) | Beacon Building Products, 567 Ventura Blvd, Oxnard, CA, 93036, United States
Register
Event Description
Join 3C-REN on March 5th at Beacon Building Products in Oxnard for an exciting opportunity to connect and grow! The 3C-REN team will be on-site to share workforce development opportunities, exclusive incentives tailored to contractors in the region and provide answers to Energy Code questions.
Learning Objectives

Discover how you can enhance your skills and grow your business with the support of our programs.
Learn about exclusive incentives available to participating contractors.
Stop by and say hello! We’ll be thrilled to share more details and answer your questions.
Plus, don’t miss out on some fantastic free goodies waiting for you!
